-
- Specifications
- General
- Channels : Transmit
54
- Receive 80 Marine/10
Weather
- Controls :
On-Off/Volume, Squelch
- Status Indicators :
TX (Transmit), TRI (Triple Watch),
- HI (High), LO (Low),
U, C, I, MEM, WX, DSC,
- (Alarm), (Alert),
(GPS), (WHAM), and
- Channel Display
- Channel Display : LCD
with Orange backlight
- Buttons : 16/9/TRI,
DISTRESS, PA, UIC/MEM, SELECT,
- STEP/SCAN, H/L/MENU,
WX/ALERT
- Connectors : Antenna,
Remote, ACC, and DC power
- Size : H63 mm x W160
mm x L168 mm (W/O Heat Sink)
- H3.07 inches x W7.24
inches x L6.61 inches
- Weight : 1.0 kg /
2.65 lbs / 42.3 oz
- Supply Voltage :
13.8V DC negative ground
- Standard Accessories
: Mounting bracket and hardware, DC power cord,
- microphone hanger,
spare fuse, ACC Cable
- Antenna Impedance :
50 . nominal
- Microphone : Rugged 2
k. condenser mic element with
- coiled cord
- Speaker : 1.82 inch,
Mylar Cone 8
- Operating Temperature
Range : –20 °C to + 50 °C (–4 °F to
+122 °F)
- Shock and Vibration :
Meets or exceeds EIA standards, RS152B and
- RS204C
- FCC Approvals : Type
accepted under part 80 of the Rules; meets
- Great Lakes Agreement
and party boat
- requirements
- Transmitter
- Power Output : 1 watt
or 25 watt (switch selectable)
- Power Requirement :
Not rated on LO, 25 watts output: 5.6A@13.8V DC
- Modulation : FM ±5
kHz deviation (FCC designator F3E)
- Hum and Noise
Signal-to-Noise : 45 dB@1 kHz with 3 kHz
deviation with 1000 Hz
- modulating frequency
(nominal)
- Audio Distortion :
Less than 8% with 3 kHz deviation with 1000 Hz
- modulating frequency
- Spurious Suppression
: –25 dBm @ Hi, –29 dBm @ Lo
- Output Power
Stabilization : Built-in automatic level control
(ALC)
- Frequency Range : 156
to 158 MHz
- Frequency Stability :
±5 ppm @ –20°C to + 50°C
- Receiver
- Frequency Range : 156
to 163 MHz
- Sensitivity : 0.25V
for 12 dB SINAD
- Circuit : Dual
Conversion Super Heterodyne PLL
- Squelch Sensitivity :
0.5 ?V Threshold
- Spurious Response :
65 dB
- Adjacent Channel
Selectivity : 65 dB @ ±25 kHz
- Audio Output Power :
2.8 watts (10% Distortion)
- Power Requirement :
200 mA @ 13.8V DC squelched, 0.7A @ 13.8V DC
- at maximum audio
output
- IF Frequencies : 1st
21.4 MHz, 2nd –455 kHz
-
-
- Check Out
This Great Accessory!
- Uniden
Wireless Microphone
- Uniden Wireless
Microphone
-
-
-
